320S(360S)吸附式单面机
产品概述：320S(360S)吸附式单面机驱动减速箱采用浸油润滑,减小噪音,万向节传动,隔离动力源(选装).
产品介绍：
功能特点:
◆SF320S设计速度:1 20m／min
◆SF360S设计速度:1 50m／min
◆有效幅宽:1 400mm一2500mm
◆楞 辊:由320(由360)mm
◆320S(360S)吸附式单面机驱动减速箱采用浸油润滑．减小噪音,万向节传动．隔离动力源(选装).
◆上瓦辊,压力辊,涂胶辊升降．均以气动控制.
◆导纸方式采用真空吸附．带风量调节装置．保持高速状态下瓦楞楞型的稳定.
◆瓦辊,压力辊轴承采用耐高温润滑脂润滑.
◆涂胶部采用自动循环供胶.
◆上下瓦楞辊采用48CrMo优质合金钢．经过热处理或碳化钨处理．硬度在HR58L60.表面经研磨.
◆涂胶辊表面经过网纹刻花及镀铬处理.
◆手动或电动隔胶装置.
◆涂胶部停机可独立运转或不独立运转两种方式.
F L{nction eharaetoristiss:
◆320S Design Speed:120m／min
◆360S Design Speed:1 50m／min
◆E仟ective width:1400mm．2500mm
◆Corrugated roller:巾320(巾360)mm
◆Drive reducer box with 0¨immersed type lubricating to reduce noise keep running stable．adopt gimbal transmission．separate power(optionaI)
◆Corrugating relier,pressure roller and glue roller by pneumatic adjustment．
◆Cardboard transmit adopt vacuum suction method．with wind control system．keep flute profiles stable of the lower-roller in the condition of run—ning up．
◆Bearing of corrugated and pressure roller adopt high temperature lubncate grease．
◆Glue pads auto supply glue circularly．
◆The upper-lower corrugating roller are made of 48CrMo high quality alloy steel．after heat—treatment．The hardness HRC58.-60~,the surface be
grinded．
◆The glue part SU rface are treated by special mesh snicked and chromeplated．
◆Motorized or manual glue width dividing to match the paper width．
◆Glue part can be running independently or non-independently while stopped．