CMM1-50K CMM1-100K
型 号 额 定 量 程
CMM1(R/J)-50K 490.3 N {50 kgf}
CMM1(R/J)-100K 980.7 N {100 kgf}
CMM1(R/J)-200K 1.961 kN {200 kgf}
CMM1(R/J)-500K 4.903 kN {500 kgf}
CMM1(R/J)-1T 9.807 kN {1 tf}
CMM1(R/J)-2T 19.61 kN {2 tf}
规格
额定量程 490.3 N {50 kgf}～19.61 kN {2 tf}
安全过载 150 %R.C.
极限过载 200 %R.C.
额定输出 2 mV/V±0.005 mV/V
非线性 0.15 %R.O.
滞后性 0.1 %R.O.
重复性 0.05 %R.O.
推荐激励电压 12 V 以下
最大激励电压 18 V
零点平衡 ±0.06 mV/V
输入电阻 425 Ω±50 Ω
输出电阻 350 Ω±5 Ω
绝缘电阻 2 000 MΩ 以上(DC50 V)(电桥与主体之间)
补偿温度范围 －10 ℃～70 ℃
安全温度范围 －20 ℃～80 ℃
温度变化对零点的影响 0.05 %R.O./10 ℃
温度变化对输出的影响 0.1 %LOAD/10 ℃
电缆 φ6.3、带4芯屏蔽线、3 m直接连接、带前端Y型压接端子 (CMM1R-50K～2T： 带柔性电缆(6M))
防护等级 IP67
弹性体的材质 不锈钢
寿命 额定量程时1 000 000次
CMM1-50K CMM1-100K
AST4600防爆压力变送器
The AST4600 explosion-proof pressure transmitter is CSA Class I Division 1 approved for use in hazardous areas. Constructed with a simple-yet-rugged design, this pressure transmitter stands up to a variety of explosion-proof applications where price and performance are critical.
Available with voltage output signals, the AST4600 can be used for applications requiring low power consumption or packaged with a 4-20mA output signal for common integration into PLC"s and controllers and long distance transmissions. The pressure sensing element is most commonly packaged with 316L stainless steel to offer excellent liquid and gas compatibility and comply to NACE MR0175 standards. Inconel 718 material is used in applications requiring a Canadian Registration number (CRN) to standard B31.3. Hastelloy C276 is available for corrosive liquids and gases applications.
Design Benefits - Class I Division 1 Explosion Proof Groups A, B, C, D
- ATEX / IECEx Flame-proof: Class I, Zone 1, Ex d IIC T5 Gb (Ta = -40°C to 85°C)
- ANSI/ISA - 12.27.01.2003 Certified "Single Seal" (no need for expensive secondary seal)
- ABS (American Bureau of Shipping) Approved
- CRN B31.3 Available
- All Stainless Steel Construction
- Wide Operating Temperature
- Pressure from 1 to 20,000 PSI
- Rugged Design Withstands Harsh Environments
- Suitable for High Shock and Vibration
- Available in Exotic Alloys (Consult Factory for Inconel 718 or Hastelloy C276)
Applications / Industries Industrial OEM & Hydrogen Equipment
- Natural Gas Compressors
- Refrigeration
- Pipe Line Instrumentation
- Marine & Offshore
- Pressure Instrumentation
- Oil Platforms
- Well Head Pressure
- Hydraulic Fracturing
- Power Generation
- Mining Applications
AST46DS防爆压力变送器
AST46DS explosion proof pressure transducersfeature the latest advances in transducer technology. Capable of using a power supply as low as an 8VDC and low current consumption, the AST46DS pressure transducer can operate in remote areas with minimal power. The re-zeroing function, allows for field calibration in a safe environment to further enhance well site or system readings. Pressures are available up to 20,000 PSI; AST46DS pressure transducers and transmitters are designed for all common oil and gas pressures from shallow to deep wells.
· Explosion Proof: Class I & II Division 1 / 2 Groups A, B, C, D, E, F, G
· Class III Division 1 & 2
· ATEX and IECEx Ex d IIC T5 Gb
· ANSI/ISA 12.27.01-2003 Single Seal Approved
· ABS (American Bureau of Shipping) Approved
· Display Units: PSI | Bar | kpa | Mpa | kg/cm2 | in WC | Volts | mA
Design Benefits - Low current consumption voltage output
- Re-zero push-button functionality
- Display pressure units or output signal
- Accurate, repeatable sensor technology
- Rugged design withstands harsh outdoor
- environments
- Available in exotic alloys
- High quality, NEMA 4X case and finish withstands salt spray and outdoor environments
Applications / Industries SCADA systems
- Wellhead systems (casing, tubing, hydraulic, vapors...)
- Compressor systems and stations
- Pipeline instrumentation and odorizing equipment
- Power generation equipment
- Offshore platforms and BOP"s requiring salt spray protection and NEMA 4X rating
- Oil and gas pressure monitoring
- Test systems
CMM1-50K CMM1-100K