


美国原装美孚雷霆1号4T V-Twin 20W-50
Mobil 1 V-Twin 20W-50 4-cycle motorcycle oils
Mobil 1 Motorcycle
Full Synthetic, High-Performance Motorcycle Engine Oils
美孚一号 全合成,高性能摩托机油
Product Description
Mobil 1 Motorcycle Oils are advanced performance synthetic motorcycle oils. The unique, synthetic structure of the Mobil 1 Motorcycle formulations
enables them to offer advantages well beyond conventional motorcycle oils of similar viscosities. For example, conventional mineral base oils change
viscosity as the temperature changes.. This characteristic forces manufacturers of conventional, multigrade motorcycle oils to use additional additive
thickeners which will help the oil maintain its viscosity as the temperature increases. These thickeners can shear down and lose their thickening
capacity in an operating engine or transmission. Synthetic fluids, however, do not require much thickener to achieve a multigrade viscosity rating and,
in some cases, do not require any thickener. As a result synthetic formulations will provide a more shear stable and protective oil film for engine bearings,
piston rings, transmission gears and other critical engine parts. than a conventional oil of a similar viscosity grade.Both Mobil 1 Motorcycle formulations
offer excellent flow characteristics at low temperatures to reduce engine wear at startup, and outstanding resistance to oxidation and/or volatilization at
high temperatures, both of which degrade the oil. Further, the Mobil 1 Motorcycle Oils provide outstanding protection against engine wear under
hightemperature and high engine speed conditions. Each of the Mobil 1 Motorcycle product formulations have been optimized to meet the unique
performance characteristics demanded by motorcycle engines and thus, provide a higher level of performance and protection for motorcycle engines
than even the Mobil 1 Automotive engine oils.
美孚一号摩托机油是一款高性能全合成摩托专用机油.其独特的全合成配方使其在性能上远远由于同黏度等级的传统矿��油.传统矿物基础油随着温度的变化黏度也会发生一定的变化.这一特点迫使机油制造商在矿物油中加入黏稠剂添加物,该添加物可以在温度发生改变时帮助机油保持原有黏度.但该黏稠剂的抗剪切能力较弱,在一些情况下,可能黏稠剂的成分会遭到破坏而失效.该产品则不需要加入很多黏稠剂,甚至可以不需要加入黏稠剂.该机油的全合成配方具有提供更强的抗剪切稳定性和更具保护性的油膜,可以对活塞环和自动变速箱齿轮等重要机器部件提供更好的保护.效果远远超过同黏度的传统矿物质机油.
该产品在低温环境下具有极佳的流动性,在引擎启动过程中可以有效降低引擎的磨损.在高温环境下可以有效防止机油被氧化和挥发,防止机油变质.在引擎处于高温或高转速工作时,该产品可以有效保护引擎部件.该产品可以满足摩托引擎特殊的性能需要,为摩托车引擎提供更高级别的保护,效果甚至优于美孚一号Automotive机油.
Features and Benefits
Mobil 1 Racing 4T 10W-40 and Mobil 1 V-Twin 20W-50 4-cycle motorcycle oils
• Maximum shear stability to resist viscosity shear down in high performance engines and transmissions
• Exceptional thermal stability to resist oxidation and high-temperature degradation
• Outstanding protection against wear of engine and transmission components
• Enhanced lubrication to help maintain maximum power and acceleration over the life of the engine
• Optimized wet-clutch performance , meets JASO MA
• Excellent low temperature flow characteristics to help minimize engine wear during start-up
特性:
美孚一号Racing 4T 10W-40和美孚一号V-Twin 20W-50四冲程摩托机油:
1 具有极强的抗剪切稳定性,防止引擎机油或变速箱油因抗剪切性较弱而失效.
2 卓越的热稳定性可以在高温环境下有效防止被氧化及热分解.
3 该产品极佳的润滑性使引擎时刻保持最佳性能,并延长其使用寿命.
4 理想的湿式离合性能,达到JASO MA标准
5 极佳的低温流动性,有效降低引擎启动过程中的摩擦力.
Applications
Mobil 1 Motorcycle Oils are full synthetic, high-performance engine oils formulated specifically to meet the demanding needs of motorcycle engines.
Mobil 1 Racing 4T 10W-40 is designed primarily for on-road, highperformance, 4cycle sport bikes, however, it may be used in other types of on
and offroad 4cycle motorcycles especially where a 10W40 viscosity grade is specified. Mobil 1 VTwin 20W50 is formulated to offer outstanding
protection in 4cycle, VTwin type engines, particularly those which are air cooled and tend to run hotter than other types of engines.
Mobil 1 Racing 4T 10W-40 and Mobil 1 V-Twin 20W-50 are recommended for 4-cycle, motorcycles which specify the use of a 10W-40 or a 20W-50
engine oil, respectively. These products will provide excellent performance in motorcycle engines that are designed with a common engine/transmission
lubrication system or where the engine lubrication system is separate from the transmission system. In the case of the latter, follow the manufacturer's
recommendation for the type of fluid to be used in the transmission. Mobil 1 Racing 4T 10W40 and Mobil 1 VTwin 20W50 engine oils are also designed to provide the proper frictional characteristics necessary for wetclutch engine/transmission systems. Mobil 1 Racing 4T 10W40 and Mobil 1 VTwin 20W50 exceed the requirements of API Service Categories SJ, SH, SG/CF, CD and JASO MA . They have been fully tested, both on laboratory
dynamometers and in the field, to provide optimum horsepower and acceleration.
应用:
该产品是一款全合成,高性能机油,达到当即摩托引擎的机油使用标准.Mobil 1 Racing 4T 10W-40最初主要设计用于路用高性能,四冲程摩托.然而它也可以用于其他类型的路用和越野四冲程摩托,特别是推荐使用10W-40黏度的摩托引擎.Mobil 1 V-Twin 20W-50主要用于四冲程,双v型引擎,特别是那些较容易过热的引擎.
上述两种产品推荐用于需使用10W-40和20W-50黏度机油的四冲程引擎.这些产品可以应用于各种类型变速箱的摩托车,包括组合变速箱和非组合变速箱.若变速箱类型为后者,在使用该产品时,一定要遵照机动车制造商对于机油使用的要求.上述两种产品达到API SJ, SH, SG/CF质量等级.经过测试,这两种产品可以使引擎展现更为卓越的性能.
| Racing 4T | V-Twin |
API SJ | X | X |
API SH | X | X |
API SG | X | X |
API CD | X | X |
API CF | X | X |
API TC | X | X |
JASO MA | X | X |
技术参数:
Mobil 1 Motorcycle Oils | Racing 4T | V-Twin |
Product Number | 48138-2 | 48139-0 |
Engine/Application Type | 4-Cycle | 4-Cycle |
SAE Grade | 10W-40 | 20W-50 |
Service Classification | API SJ,SH, SG/CF | API SJ, SH, SG/CF |
Gravity, API | 30.5 | 29.4 |
Density, lb/gal @ 60°F | 7.28 | 7.33 |
Flash Point (ASTM D92), °C (°F) | 253 (487) | 270 (518) |
Pour Point, °C (°F) | -54 (-65) | -51 (-60) |
Viscosity | | |
Kinematic, cSt @ 40°C | 86.0 | 130.0 |
Kinematic, cSt @ 100°C | 13.8 | 17.7 |
Cold Cranking, cP | 2900 @ -20°C | 2930 @ -10°C |
Pumping, cP | 11500 @ -30°C | 8500 @ -20°C |
Viscosity Index | 164 | 150 |
美国官方网址:http://www.mobiloil.com/USA-English/MotorOil/Oils/Motorcycle_Oils.aspx